Exhaust and body tub

Tuesday 12^th July

Trail fitted the exhaust downpipes and collector, it’s a bit fiddly to get all 4 into the collector but got there eventually. Put the body tub on and marked out where to cut the hole for the exhaust downpipes to pass through. This was quite a nervous moment as if you get this wrong then it looks crap or you need to get a new body tub. I used a hole saw for the larger top radius on the hole and a 10mm drill bit for the lower smaller radius, I could then get my air saw into the side to cut the hole out. Worked out pretty good, I just need to enlarge the hole at the rear side to give some clearance from the down pipes. Will add some pictures once it is finished.