Updates

Tuesday 31^st July 2012

Ok no updates for a while as I have been out enjoying the limited good weather we have. Be tinkering with the car too, so updates to car since last post.

Replaced the standard tiger exhaust with a repack able 6” polished wunoff exhaust.

Tidied up the engine bay, I was not overly impressed with the standard look, I had some aluminum left over from the build so I made a template of the bulkhead and transferred this to the ally, I then polished the ally so a nice shiny finish.

Next was the pedal box cover as supplied with the kit, this was GRP and didn’t fit very well and also gave me issues putting the bonnet back on so I decided to make my own. Again I used ally and polished it.

I also purchased a polished ally expansion tank and fitted this to the bulkhead.

I also Purchased a polished ally battery tray

The last piece I added I made is a polished ally cover for the plugs and leads.

I also polished the aluminum water pipe which finishes it all off quite well. Picture below of the finished bulkhead.

The next updates I am looking to do is to change the water hoses to orange silicon, I also want to change the rear lights for round ones.